FAQ
When the boat battery is disconnected, Sentinel will run approx 12 hrs on internal battery. After that the device will shut off and wait for the external po...
Tue, 25 Sep, 2018 at 9:15 AM
Sentinel HUB has 2 general purpose input-output pins. Both can be used as outputs, through configuration. !WARNING! Before proceeding make sure that wir...
Tue, 4 Dec, 2018 at 8:32 AM
The GPS reception on your device is very poor. Here are a few things to check: Make sure the that you followed these guidelines when positioning the devic...
Wed, 4 Sep, 2019 at 10:04 AM
This guide is accompanied with images from web app located at http://web.sentinelmarine.net. In mobile apps, the procedure is similar, just use the pencil b...
Thu, 5 Oct, 2023 at 10:56 AM
Alerts are currently available for the following sensors: Battery Voltage Bilge Door Shore Depth Alert customization is current...
Wed, 21 Feb, 2024 at 11:18 AM
1. Scope Czone integration provides remote access to CZone circuit states, option to control the circuits remotely and access to some or all CZone alarms*....
Tue, 21 Nov, 2023 at 9:20 AM
How will I be informed that my subscription needs to be renewed? 21 days before your subscription expires, you will receive an email with instructions o...
Wed, 31 Mar, 2021 at 11:16 AM
Boat monitor's three digital inputs are predefined to Bilge, Shore and Door for faster installation. However, digital and analog inputs can be configur...
Thu, 5 Oct, 2023 at 12:25 PM
Our devices work with normal mobile network and not with satellite network, so usually devices work approximately 20 miles from the nearest land (with a p...
Wed, 29 May, 2019 at 10:59 AM
What is the frequency for sensor reporting? How often does the application report new data? Sensors are updated every 20min when the boat is not moving ...
Wed, 29 May, 2019 at 1:57 PM