Alerts are currently available for the following sensors: 


  • Battery Voltage

  • Bilge

  • Door 

  • Shore

  • Depth


Alert customization is currently only available in the through the web app.

Here is a procedure explaining how to do it:


1. Login to https://web.sentinelmarine.net/login with the same credentials that you use in the mobile app.


2. At the left bottom corner, click on the sensor on which you want to customize the alert (Marked with number "1" in the image below). Once you click any sensor, a new menu should pop out on the right side of the screen called “Configure sensor".


3. Select ON or OFF to enable / disable the alert. (Marked with number "2" in the image below)


4. To modify the alert threshold value (high/low) and the alarm message, click on the “Change” text. Apply the changes by clicking the Save button. (Marked with number "3" in the image below)